band detection equipment, and generate 300MHz-6000MHz broadband interference signals to suppress UAV communication frequency bands and enable intrusion into UAVs. Carry out emergency landing or return, and achieve omnidirectional and directional multiple-choice strikes.
1.The non-gun type design is easy to conceal and does not require a turntable to achieve 360-degree omnidirectional and directional;
2. Achieve any communication frequency interference within the entire frequency band, including unmanned aerial vehicles in unconventional frequency bands and
frequency-modified UAVs;
3.Supports simultaneous suppression of up to five frequency bands, each output signal is 30W, ensuring the suppression needs of applications and new drones;
4. Based on the dynamic tracking results (frequency range, orientation) discovered by the reconnaissance equipment, the countermeasure equipment can achieve guided precision strikes, forcing the aircraft to make an emergency landing and return;
5. Selective configuration of interference can be achieved, such as directional suppression, sector suppression, omnidirectional suppression and other options,
without the need to rotate the equipment;
6.The interference parameters can be set to ensure effective combat against various types of UAVs;
1.Output frequency: 300MHz~6000MHz;
2.Output power: 50W (directional interference distance ≥5km, omnidirectional interference distance ≥3km);
3.Harmonic suppression: 40dBc;
4. Simultaneous emission of interference frequency bands: 5 bands (300-1000MHz, 1000-2400MHz, 2400-2500MHz, 5725-5850MHz, 2400-6000MHz)
5.Single-band interference bandwidth: ≥200M
6.Directional antenna coverage: 45 degrees horizontally and 45 degrees pitched
7.Overheating protection: 85℃
8. Working temperature: -40℃ to +65℃;
9.Overall dimensions: 630mm×630mm×560mm;
10.Equipment weight: less than 30 kg
11.Power supply: 220V AC;
12.Control: 10M/100M network port.
1. Left operation bar
It is divided into three types of control functions, navigation deception, analog source, and map settings. Navigation deception mainly targets the navigation deception control functions of UAVs, including power settings, fixed-point trapping, directional eviction, navigation interference, induced landing and area protection functions.
2. Top display and operation area
Includes real-time display of current signal emission status, stop signal button, and buttons to minimize and exit the system.
3. Intermediate map situation
The map mainly displays the status of equipment, drones and other targets. The upper left corner of the map displays the longitude and latitude coordinates of the mouse movement in real time, as well as the number of satellites searched by the current device.
4. Right display area
The right side of the main interface mainly includes device management and real-time status. The device management area displays the running status of the devices in the current system in the form of a tree structure, and different functions can be operated by clicking on the shortcut menus of different tree nodes.