1 Product profile
This module is ST-B 1L 1-100-12V, which is an anti-interference terminal with 100mm diameter. It mainly serves small and medium-sized autonomous driving platform, protect user terminals from all kinds of unintentional interference and intentional attacks, and greatly improve the security of PNT information.
2 Product characteristics
With interference power detection function, facilitate interference calibration, complete device joint test, etc
Support the secondary development, which can be further used for spectrum monitoring, histogram analysis and other processing
Support the 4-array anti-interference.
Built-in navigation and positioning module, and output positioning
information according to the NEMA 0183 protocol.
3 Features
capacity of resisting disturbance:
Single-directional interference: ≥ 95 dBc Multi-directional interference: ≥ 85 dBc
Interference Type:
Band limit Gaussian white interference, spread frequency matching spectrum interference;
Pulse interference, sweep interference;
Mixed interference;
Anti-interference airspace: orientation: 0°~360°, angle of elevation: -30° ~90°
Volume: (100 ± 0.5) mm (100 ± 0.5) mm (25 ± 0.5) mm
Power consumption: 7.2W (room temperature, including positioning module)
Weight: ≤300g
4 Physical dimensions and installation
100mm x 100mm x 25mm 。The four corners of the whole machine are the mounting holes. Fixation by the four M3 screws to the platform vector is indicated.
During installation, we need to pay attention to that the direction of the radome faces up. If placed in the platform carrier, the permeable wave material should be used above the product.